Maintenance of Belt Conveyor
The belt conveyor transports materials through friction, so during daily operation, the maintenance should be done well.
1. The conveyor will be loose after using for a period of time, it is necessary to adjust the tensioning screw or balancing weight.
2. If the core part of the conveyor exposed, it should be repaired in time.
3. When the core part of the conveyor is broken, corroded or rusted, it must be scrapped.
4. Check the connector of the conveyor, whether it is connected well.
5. Check whether the up and bottom rubber face are worn, whether the belt has half friction.
1. The breaker is easy to contaminate with oil installed at the driving device, so as not to affect the braking effect, it should clean up the nearby grease dirt.
2. When the brake wheel is cracked and the abrasion thickness of the wheel edge up to to 40% of the original thickness, it must be scraped.
Previous Article：The Equipment of Steel Slag Processing
Next Article: The Correct Step of the First Test-Run of Vibrating Screen