How to Improve the Working Efficiency of Sand Washing Machine
The main function of the sand washing machine is to remove impurities in sand and gravel products. In the production process of machine-made sand, the sand washing machine has the advantages of large processing capacity and high cleaning degree. It is the mainstream equipment for wet sand making. After a long time, the efficiency may decrease. The following will introduce the methods to improve the working efficiency of the sand washing machine.
1. Pay attention to the installation of sand washing machine
When the sand washer is installed for the first time, a comprehensive inspection should be carried out, and at the same time, it should run for 8 hours at no-load. When the sand washer is running at no-load, the technician should continuously add lubricating oil to check whether the connection points of the sand washer are reliable. After that, the load will run for about 8-24 hours.
2. Regular inspection and maintenance of sand washing machine
The sand washing machine equipment should be regularly maintained and inspected, and the problems should be developed and solved in time to ensure the normal operation of the sand washing machine. If the repair and maintenance are not carried out in time, various failures of the sand washing machine may occur, reducing the production efficiency of the sand washing machine.
3. The foundation of the sand washing machine is firm and sufficient space is reserved
The sand washing site should ensure that the foundation of the production line is firm, and at the same time, there should be sufficient production space to ensure smooth material transportation and production.
4. Clean the sand washing machine in time
After the sand washer is used, it is necessary to develop a good habit of timely cleaning. After the sand washer has accumulated over time, it is easy to cause the sand washer pipeline to be blocked. Therefore, it should be cleaned in time, and the various parts of the sand washer should be cleaned and dried for inspection.
5. Regularly carry out lubrication operations
Regularly lubricate the sand washing machine, use lubricating oil of the specified brand for lubrication, and do not forget any lubrication point.
6. Do a good job of anti-rust and rust removal
The steel material of the sand washing machine and the environment of open air work require that the sand washing machine should do rust removal and anti-rust work in time. The sand washing machine is in contact with water for a long time. If it is not handled in time, it may cause rust of equipment parts and poor operation Flexible and affect the normal operation efficiency of the equipment.
7. Regularly observe the wear of the sand washing machine
Regularly observe the wear and tear inside the sand washer. If it is found that the parts of the sand washer are worn and affect the production and operation, it must be repaired or replaced in time. After the important wearing parts of the sand washer are worn out, contact the manufacturer for repair and replacement in time.
Previous Article：No Information